| Re:Edit: Bäh! Nicht aufgeladen... |  |
>Wie erkennt man eigentlich, dass das Ding lädt? Leuchtet das kleine Lämpchen dann rot? Weil kurz geleuchtet hat es, nachdem ich es an den USB-Stecker gehängt hab. Aber halt nur kurz. Wenn ich es eingesteckt einschalte gibt's wieder die Meldung ich soll's einstecken und schaltet dann nach 60 Sekunden ab. Buh!!!
>
>Andreas
Das PB hatte noch eine ältere Firmware drauf. Das dürfte bei Deinem auch der Fall sein. Die Lade-Rückmeldung wurde bei einigen Firmware-Versionssprüngen ein wenig geändert.
Die kurze rote LED-Meldung ist aber im Folgenden nicht dabei.
"Charge Behaviour:
[...]
Starting in BlackBerry Tablet OS 1.0.5:
The device will show a solid red LED, followed by a solid yellow LED as the device boots into charging mode. This is followed by a yellow pulsating LED indicating charging in progress.
The time span between the red and yellow lights can be as long as 45 seconds as the device boots into charging mode.
Once the yellow LED illuminates, the device can be started, but it is advisable to let it charge for at least 3.5 hours to achieve a sufficient charge.
The device will show a solid green LED once the device is fully charged.
[...]
Starting in BlackBerry Tablet OS 2.1.0:
Once the yellow LED begins pulsating indicating charging mode, if the tablet is disconnected from the charger, a graphic will be displayed on the screen indicating to reconnect the power source.
The graphic will be displayed for 20 seconds before the tablet powers off if the power source is not reconnected. The PlayBook is fully charged when the pulsating LED changes to a solid green light. The graphic indicating that the power is source is not connected, may still appear even when the tablet is fully charged. The same graphic will also be displayed if the tablet is turned on and there is not sufficient power to perform the boot process."
[http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=6C3AD294DC0B9D8BB2C7BF5722E81D68?externalId=KB27705&sliceId=2&cmd=displayKC&docType=kc&noCount=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl]